Best Water Filter Kleen

This convenient package includes (4) KleenWater KW810 grooved cartridges and (2) KW101 o-rings. The cartridges are 4.5” (W) X 9.75” (L) and are rated for 5 micron sediment entrapment. These cartridges are designed to fit in the Whirlpool Water Filter WHKF-DWHBB. The raised groove designed has a very impressive surface area which prolongs the service life of the cartridge. The KW810 cartridge is compatible to the Whirlpool Model WHKF-WHPLBB and Filtrete Model 4WH-HDGR-F01. Replace cartridge every 6 months or upon substantial pressure reduction. The KleenWater KW810EC features plastic end caps with gaskets and a raised ridge grooved design which provides a significant increase in surface area. The o-rings are constructed of nitrile Buna rubber and will fit Whirlpool Model WHKF-DWHBB.

Four KW4510BR Dirt / Sediment Water Filter Cartridges and (1) O-Ring
The o-ring is designed to fit wide body housing for the following manufacturers: GE (WSO3X10039), Whirlpool (WHKF-WHPLBB), Pentek/Ametek/American Plumber (Big Blue) and Culligan HD-950. This 20 micron replacement cartridge is constructed of pleated polyester which benefits the consumer in two ways. The pleated design provides a very large exposed surface area that gives the cartridge impressive solids-holding capacity. This cartridge is a single membrane which allows for occasional cleaning. Its performance is commensurate to the competition at a lower cost.The industry universal dimension of 4.5 inch x 10 inch makes it compatible with filter housing manufacturers such as GE (GXWH35F, GXH30C, GXWH40L), Whirlpool (WHKF-DWHBB), Cuno(AP801), Sears/Kenmore(38448), Culligan(Big Blue) and Ametek (Big Blue), among others.
Specifications / Features: polyester media is bacteria and chemical resistant thus the cartridge is suitable forresidential, commercial & industrial applications ~ 4.5 x 9.75 inches ~ industry standard universal dimension ~ fits Culligan, 3M Purification / Cuno Aqua-Pure, GE, Ametek (AKA Pentek/US Filter) – Big Blue ,Sears and many other water filter housings ~ change cartridge every 6-10 months or upon substantial pressure reduction ~ operating range:20-100 psi, 40-100 F temp, pH 4-10 ~ flow rates up to 20 gallons per minute. The smaller the micron rating the better the entrapment capability. KleenWater is a trademark of Pavel Water Filtration.

Four KleenWater Filters compatible with 3M Cuno Aqua-Pure AP810, AP801, Whirlpool WHKF-GD25BB

4.5 inch x 9.875 Inch water filter alternative cartridges. This KleenWater brand water filter replacement cartridge is a high quality, low cost alternative to the original manufacturer AP810. The rigid polypropylene construction effectively removes dirt and sediment with impressive flow rates of up to 20 gallons per minute. Each cartridge contains two distinct micron layers. Larger particles are trapped near the exterior and progressively finer particles towards the filter core. Thus the cartridge has exceptional solids-holding capacity and will perform longer. The KleenWater KW810EC features plastic end caps with gaskets and a raised ridge grooved design which provides a significant increase in surface area. This replacement cartridge is an ideal choice for the value conscious consumer. The cartridge should be changed every 6 – 12 months or upon noticeable pressure reduction. 5 Micron gradient density melt blown polypropylene construction. To provide perspective to the 5 micron sediment entrapment rating it is important to note the naked human eye can see down to 20 micron and a human hair is 100 microns in diameter.

Also included are 4 RGAP801-AP802 water filter o-rings. These are made of NSF approved Nitrile rubber also known as Buna-N. It is important to change your o-ring at regular intervals to ensure a reliable water tight seal between the filter head and filter sump. It is recommended to keep a spare o-ring to avoid an urgent situation.

Includes six KleenWater KW810 filters. These water filter replacement cartridges are a high quality, low cost alternative to the AP810/AP801. The rigid poly-spun construction effectively removes dirt and sediment with impressive flow rates of up to 20 gallons per minute. Each cartridge contains two distinct micron layers. Larger particles are trapped near the exterior and progressively finer particles towards the filter core. Thus the cartridge has exceptional solids-holding capacity and will perform longer.

The KW810 features a raised ridge grooved design which provides a significant increase in surface area.
Melt Blown Polypropylene Construction
Shrink Wrapped for Purity
Flow Rate 20 GPM.
Recommended cartridge change every 6 months or upon substantial pressure reduction.

The industry universal dimension of 4.5 inch x 10 inch makes it compatible with filter housing manufacturers such as GE, Culligan, Cuno, Omni, Kenmore, Whirlpool and Ametek, among others.

*Occasionally there are concerns that these filters without the end caps will not be a compatible replacement for the more expensive filters with end caps and gaskets. Please rest assured these will work very well and consider this brief explanation: Creating the upper and lower seal takes some strength and effort. Located on the bottom of the water filter sump and the under side of the filter head are sharp circular rings. These rings cut into the water filter to create the seal. The cartridge is made of polypropylene which is slightly pliable. Therefore when the filter sump is screwed to the filter head the cartridge gets squeezed and the rings create a circular crease on the bottom and top of the cartridge. This is a very simple installation. If you want to soften the cartridge to make it even more simple soak the filter in slightly hot water for 10 minutes prior to installation. This will slightly soften the cartridge.

The rigid polypropylene construction effectively removes dirt and sediment with impressive flow rates of up to 20 gallons per minute. Each cartridge contains two distinct micron layers. Larger particles are trapped near the exterior and progressively finer particles towards the filter core. Thus the cartridge has exceptional solids-holding capacity and will perform longer. The KleenWater KW810EC features plastic end caps with gaskets and a raised ridge grooved design which provides a significant increase in surface area. To provide prospective to the 5 micron sediment entrapment rating it is important to note the naked human eye can see down to 20 micron and a human hair is 100 microns in diameter. The industry universal dimension of 4.5 inch x 10 inch makes it compatible with filter housing manufacturers such as GE, Culligan, Cuno, Omni, Kenmore, Whirlpool WHKF-DWHBB and Ametek “Big Blue”.

Specifications 4.5 x 9.75 inch universal dimension 75/25/5 micron filtration Up to 20 GPM flow rate Change cartridge every 6 months or upon substantial pressure reduction Includes one water filter housing replacement o-ring for Whirlpool WHKF-DWHBB . These cartridges have an approximate diameter of 4.5 inches. The o-ring itself actually measures approximately 5.465 inches (inside diameter). We recommend consumers keep a spare o ring available to avoid urgent situations

KleenWater is a trademark of Pavel Water Filtration.

Conclusion

By our suggestions above, we hope that you can found water filter kleen for you.Please don’t forget to share your experience by comment in this post. Thank you!