minmommy 
Nowadays, there are so many products of pentek pentair water filter s1 in the market and you are wondering to choose a best one. You have searched for pentek pentair water filter s1 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pentek pentair water filter s1 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
28,974 Reviews Scanned
Pentek S1 Whole House Filter, Replacement Cartridge
Pentek S1-20BB Pleated Cellulose Filter Cartridge, 20" x 4-1/2", 20 Micron
- Reduces sand, dirt, silt, rust, and scale particles in residential and commercial water
- Nominal filtration rating of 20 microns
- Cellulose media pleated around a polypropylene core for strength
- Initial pressure drop of less than 1.2 psi at a flow rate of 10 gpm
- Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C)
This Pentek S1-20BB pleated cellulose filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. It has a nominal filtration rating of 20 microns at an efficiency of 85%. The filter is made of cellulose media pleated around a polypropylene core for strength. It has an initial pressure drop of 1.2 pounds per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This pleated filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.
Specifications
| Nominal filtration rating | 20 microns |
| Initial pressure drop at 10 gpm | 1.2 psi |
| Recommended flow rate | 35 gpm |
| Operating temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 20 x 4-1/2 inches (508 x 114 mm) |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek S1-BB Pleated Filter (9-3/4" x 4-1/2"), 20 Micron
- Replacement filter cartridge for sediment reduction in general filtration applications
- Nominal filtration rating of 20 microns
- Resin-impregnated cellulose filter media pleated around a polypropylene core and sealed in plastisol to form a unified end cap for strength
- Initial pressure drop of 1.2 psi at 10 gpm
- Temperature rating of 40 to 145 degrees F (4.4 to 62.8 degrees C)
This Pentek S1-BB pleated cellulose filter cartridge reduces dirt and sediments in general residential and commercial water filtration applications. It has a nominal filtration rating of 20 microns. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core and sealed in plastisol to form a unified end cap for strength. It has an initial pressure drop of 1.2 pounds per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This pleated cellulose filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.
Specifications
| Nominal filtration rating | 20 microns |
| Initial pressure drop at 10 gpm | 1.2 psi |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Dimensions* | 9-3/4 x 4-1/2 inches/248 x 114mm (H x W) |
| Surface area | 2,070 square inches (1.34 square meters) |
| Recommended flow rate | 20 gpm |
*H is height, the vertical distance from bottom to top; W is width, the horizontal distance from left to right.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems under the Pentek brand. The company, founded in 1966 and headquartered in Schaffhausen, Switzerland, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek Pentair 155405-43 S1-BB Pleated Cellulose Sediment Water Filter Cartridge 20 Micron 9-3/4"x4-1/2", Pack of 8
- City Water Only Contaminant Reduction Sediment (Sand, Dirt, Silt, Rust, And Scale Particles) Dimensions: 20″ L X 4-1/2″ D Rating: 20 Micron Flow Rate: 1.2 Psi At 10 Gpm
- City Water Only Contaminant Reduction
- Sediment (Sand, Dirt, Silt, Rust, And Scale Particles)
- Dimensions: 20″ L X 4-1/2″ D Rating: 20 Micron Flow Rate: 1.2 Psi At 10 Gpm
Pentek 155305-43 Specifications Filter Media: Pleated cellulose Application: City water only Contaminant Reduction: Sediment (sand, dirt, silt, rust, and scale particles) Dimensions: 20″ L x 4-1/2″ D Rating: 20 micron Flow Rate: 1.2 psi at 10 gpm Temperature Rating: 40°F to 145°F Part Number: 155305-43 / 15530543 S1 Series Cartridges Overview High flow filtration (very little pressure drop) Pleated design maximizes dirt-holding capacity Designed for general water filtration purposes Recommended for chlorinated water supplies Compatible Part or Model Numbers American Plumber W20CLHD20, 155305-51 Ametek S1-20BB Bruner S1-20BB Culligan S1-20BB Flowmatic FMBB-10-5 Keystone GC20-20 Kleen Plus S1-20BB Plymouth Products S1-20BB USFilter / US Filter S1-20BB Waterite Excelpure PL20B20
Pentek S1 20 Micron Standard 10 x 2.5 Inch Pleated Sediment Water Filter 12 Pack
Pentek S1 Sediment Filter (2-Pack)
Pentek S1 Sediment Filter (2-Pack). 9-3/4″ x 2-5/8″, 20 Micron Pleated Cellulose Water Filter. The Culligan / Pentek Compatible S1 Sediment Filter will fit in the following Reverse Osmosis Systems: PuROLine 5000 Reverse Osmosis,HF-150, HF-160, HF-360, HF-365, RO-2127. Ametek, USFilter, and Plymouth Products models #10 Blue, #10 Clear, Cuno, AquaPure, Omni, Sears, Fulflo, Teledyne Water Pik, Ace, Master Plumber, Flotec, Honeywell, General Electric, American Plumber, and most other water filter housings for 10″ x 2.5″ filters. The Culligan / Pentek Compatible S1 Sediment Filter can also be a replacement for the following Filters: Culligan S1a = USFilter/Ametek/Kleen-Plus S1, Omni RS1, American Plumber W20CLa, Ace Hardware 49641, MasterPlumber TrueValue 614-800, Flotec RS2, GE FXWPC, Pentek S1, USFilter S1.
Icepure ICP-PPL10BB Big Blue Pleated Sediment Compatible with DuPont WFHDC3001,GE FXHSC, Culligan R50-BBSA, Pentek R50-BBWhole House 10" x 4.5" Sediment Filter 2Pack
- 【QUICK & EASY INSTALLATION】Quick and easy installation into 10 x 4.5 inch big blue whole house filtration system, requiring no tools. For detailed instruction, please kindly refer to the Instruction Manual in the box.
- 【COMPARABLE PART NUMBERS】PUREPLUS fxhsc filter is comparable to many 5 micron 10″x 4.5″inches sediment pleated whole house water filters, Compatible with GE FXHSC, DuPont WFHDC3001, Culligan R50-BBSA, HD-950, Pentek R50-BB, American Plumber W50PEHD, GXWH40L, GXWH35F, GXWH38F, GXWH30C,GNQH38S, WHKF-WHPLBB, Pentair Pentek S1 series, EP series, EPM series. PUREPLUS hd-950 filter is a compatible spare part, the manufacturer’s names, part numbers have been used for compatibility information ONLY.
- 【HIGH QUALITY FILTRATION】Food grade material, 100% fresh polypropylene, remove sediments such as sand, rust particles and scale particles. Bring the fresher and pure water for you and your loves.
- 【6 MONTHS’ LIFETIME】PUREPLUS hd-950 filter is recommended that you replace the filter every 6 Months/30000 gallons to keep your water tasting great, depending on the local water quality.
- 【100% SERVICE GUARANTEE】★★★★★ Your purchase is fully protected when you order today. We offer 30-days free return, 90 days replace(at no charge) and professional customer service if you are not satisfied with pureplus fxhsc filter, contact us any time, we will reply within 24 hours and try our best to make things right! ORDER NOW! (NOTE: 5 micron rate is much more better than 10).
Big Blue Sediment Pleated Water Filter 10”
Food grade material; 100% fresh polypropylene.
Heavy duty universal Pleated filter for filtration models of GE, Culligan, Dupont, Kenmore, Omnifilter, Whirlpool, etc
MICRON RATE:Absolute 5 Micron
FILTER SIZE:OD: 4.5” ID:1.1” Length: 9.8”
WORKING TEMP.：4-52℃ =39-126℉
NORMAL WORKING PRESSURE:60psi
BENEFICIARY:Remove sediment such as sand, rust particles and scale particles.
SERVICE LIFE:6 Months/30,000 Gallons (Depends on actual water quality)
Fits ICP-FH10BB Filter Housing. Fits Universal Big Blue/Jumbo whole house water filter system
Compatible with the same size (10” x4.5”) of following models
DuPont WFHDC3001
Pentair Pentek S1 series, EP series, EPM series, CCBC & CEP series
Culligan R50-BBSA
GE FXHSC
WHKF-WHPLBB
**Please note this is a compatible spare part and the manufacturers’ names and part numbers have been used for reference purposes only.
**The company,product and service names used in this package are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners.
PUREPLUS 5 Micron 4.5" x 10" Whole House Big Blue Sediment String Water Filter Replacement Cartridge Compatible with 84637, WPX5BB97P, PC10, 355214-45, 355215-45, WP10BB97P, WP5BB97P, 2-Pack
- ❄️【NSF/ANSI 42&372 CERTIFICATION】 Certified by WQA against NSF/ANSI42. The filter reduces up to 99% of sediment, sand, rust, sediment, color, odor. Lead Free Certified by WQA against NSF/ANSI372.
- ❄️【100% MONEY-BACK GUARANTEE】PUREPLUS Six-Months Return Policy Guaranteed! Product Life Time Warranty on Every Filter Confirmed With Defects in Material and Workmanship Within Each Filter’s 6 Months Service Life. We promise a risk-free shopping experience backed up with our reliable customer service and technical support team.
- ❄️【MULTI-LAYER DENSITY TECH】 The whole house water filter is designed with density three PP layers to remove most particle and sediments. The inner layer is Absolute 5 micron
- the middle layer is nominal 7 micron
- while the outer layer is nominal 10 micron. The multi-layer density tech can capture impurities targetedly and have 30% longer service life than the other common type.
- ❄️【HIGH CAPACITY】 The filter can filter up to 13000 gallons depending on water quality. Suggest to replace it every 3- 6 months for the average household for optimal performance depending on the use. Let it bring a wonderful cleaner water experience to your loved ones.
- ❄️【COMPATIBLE MODELS】 The filter can be used in any standard 10”x 4.5” heavy duty Big Blue filter housings and compatible for standard 10inch X 4.5inch filter models of American Plumber W10-PR, W15-PR, Culligan HD-950, GE GXWH30C, GXWH35F, GXWH-40L, GXWH-30C, HDSFI, GXWH-35F, GNWH-38F, Aqua-Pure AP801, Hydronix HF45-10BLBK10PR, Aqua-Pure AP801, Pentek 10″, Whirlpool WHCF-WHPLBB, Waterite Excelpure PL10B30 water filter.
(Package Of 3) Pentek S1-BB Sediment Water Filters (9.75" x 4.5")
Pentek S1-BB Water Filter Replacement Information: The Pentek S1-BB water filter is easy to install in big blue whole house systems or commercial water filtration systems. The Pentek S1-BB filter cartridge should be replaced approximately every 4 months or 16,000 gallons of water. The filter change interval also depends on your water supply and water usage. Pentek S1-BB Water Filter Equivalent Brands: The following Culligan water filter model holds the Pentek S1-BB sediment water filter cartridge: HD-950. The following Ametek, USFilter, and Plymouth Products model holds this sediment water filter cartridge: #10 Big Blue. The Pentek S1BB Sediment Water Filter Cartridge also fits Cuno, AquaPure, Omni, Sears, Fulflo, Teledyne Water Pik, Ace, Master Plumber, Flotec, Honeywell, General Electric, American Plumber, and most other water filter housings for 10″ x 4.5″ filters. . .Pentek S1-BB Pleated Water Filter Cartridge Specs: Dimensions:9.75″ x 4.5″ (248 mm x 114 mm) Micron Rating (Nominal):20 Micron Temperature Rating: 40?F to 145?F (4.4?C to 62.8?C) Initial ∆P (psi) @ Flow Rate (gpm): 1.2 psi @ 10 gpm (0.08 bar @ 38 L/min) Surface Area: 2070 sq. in. (1.34 sq. m.) Recommended Flow Rate: 20 gpm (76 Lpm) Pentek S1-BB Sediment Filter Materials of Construction: Filter Media:Resin-Impregnated Cellulose End Caps:Vinyl Plastisol Core:Polypropylene (Package Of 3)
Pentek S1-20 Pleated Cellulose Filter Cartridge, 20" x 2-5/8", 20 Micron
Conclusion
By our suggestions above, we hope that you can found pentek pentair water filter s1 for you.Please don’t forget to share your experience by comment in this post. Thank you!
