Best 110V Electric Tankless Hot Water Heater Kitchen Bathroom Home

Features:
This is a water heater for the application of changing the cold water into hot water and it will meet your various needs such as used in kitchen, bath room, public restroom, etc. It is a high efficient water heater with compact size to produce the hot water very quickly. LCD digital temperature display.
Freely adjust water temperature by water flow, simple operation. Safe heater, electricity saving, water saving, no pollution, no exhaust gas. Stainless construction with mini design, it is durable, elegant and fashionable.
Specifications:
Material: Stainless Steel Shell
Color: Black, Golden, Red(optional)
Power: 3000W
Current: 25-32A

Voltage: 110V

Rated Frequency: 60Hz

Rated Pressure: 0.4-0.6Mpa
Waterproof Grade: IPX4

Temperature: 30-55℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃)

Installation wire diameter: 1.5-2.5mm² copper wire
Water pipe interface: G 1/2″ interface

Size: Approx. 20 x 10.5cm / 7.87 x 4.13inch

Package Included:
1 x Water Heater
2 x Fixing Screws

2 x Screws Protector

1 x Manual

Note:
1. Please note this item should get the water first and then link the electricity when installing.
2. You’d better install this item vertically to ensure long service time.
3. Please kindly make a note if you need any adapter.
4. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Extensive applications

This is a lightweight electric water heater with a perfect combination of inner quality and classical appearance, which applies for multiple demands of different families.

  This product uses green environmental material, which is qualified for international standard, and satisfies difficulties of hot water supply for multiple places, easily solves issues such as face washing, bathing, vegetable washing and dish washing.

 It can be installed in the kitchen, rest room, bathroom or any other places you want optionally because of its characteristics of small area, strong applicability and convenient installation.

Easy to use

It is a directly heating type with high efficiency and low power heating tube, which can take advantage of the thermal energy maximally. The temperature can be adjusted between  86℉-149℉/30℃-65℃ optionally, and the power will be off automatically when the set temperature is achieved. Its total power is 1500w and it has multiple installation methods. It is applicable for different water pressure of different areas, especially for families which are located on higher floors with low water pressure.

Technical parameter

• Rated voltage: 110V 60HZ
• Rated power: 1500W
• Temperature adjustment scope: 131℉–167℉ / 55℃– 75℃
• Minimum water pressure: 0.02MPa
• Water-Proof level: IPX4
• Product demension: 11.4″x9.8″x15.7″ / 29x25x40cm
• N.W.: 6.6lbs / 3kg
• G.W.: 8.2lbs / 3.7kg

Package include

• 1x Body of Water Heater
• 1x Operation Manual
• 1x Pressure Relief Tube
• 1x Pressure Relief Valve
• 1x Screw Kit

Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.

Specification:
Material: Stainless Steel Shell
Color: Black, Golden, Red(optional)
Power: 3000W
Current: 25-32A
Voltage: 110V
Rated Frequency: 60Hz
Rated Pressure: 0.4-0.6Mpa
Waterproof Grade: IPX4
Temperature: 30-55℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃)
Installation wire diameter: 1.5-2.5mm² copper wire
Water pipe interface: G 1/2″ interface
Size: Approx. 20 x 10.5cm / 7.87 x 4.13inch

Packing list:
1 x Water Heater
2 x Fixing Screws
2 x Screws Protector
1 x Manual

Question:
Why the water is not hot?

1.The working current of our water heater is 25A-32A, and it require at least 1.5 square millimeters of wire. Please make sure that your circuit breaker can handle the 30amp, or it will not heat water.
2.The temperature is controlled by the size of the water flow. The Water Heater will be automatically energized when the water flow is more than 0.6 liters, and automatically turn off when the water flow is lower than 0.4 liters.
3.The heating temperature is between 30 and 55 degrees. If the water flow is large, the temperature will be low, and if the water flow is small, the temperature will be high.

Save water by eliminating the wait for hot water to reach the faucet. Simply tap into the water line and install the heater directly at the sink. No need for costly recirculating lines and pumps. And when you want to eliminate the wait for hot water but need more volume, install the Eco smart heater in-line with a larger hot water source, such as a tankless heater or a storage tank heater. Lightweight and compact, these units plug into a standard 110 volt outlet.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Features:
This is a water heater for the application of changing the cold water into hot water and it will meet your various needs such as used in kitchen, bath room, public restroom, etc. It is a high efficient water heater with compact size to produce the hot water very quickly. LCD digital temperature display.
Freely adjust water temperature by water flow, simple operation. Safe heater, electricity saving, water saving, no pollution, no exhaust gas. Stainless construction with mini design, it is durable, elegant and fashionable.
Specifications:
Material: Stainless Steel Shell
Color: Golden, Red(optional)
Power: 3000W
Current: 13A

Voltage: 110 V

Rated Frequency: 50Hz

Rated Pressure: 0.04-0.4Mpa

Temperature: 30-45℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 45℃)

Installation wire diameter: ≥2.5mm² copper wire
Water pipe interface: G 1/2″ interface

Size: 16 x 13.5 x 6.5cm / 7.87 x 4.13inch (appr.)

Package Included:
1 x Water Heater
2 x Fixing Screws

2 x Screws Protector

1 x Manual

Note:
1. Please note this item should get the water first and then link the electricity when installing.
2. You’d better install this item vertically to ensure long service time.
3. Please kindly make a note if you need any adapter.
4. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Conclusion

By our suggestions above, we hope that you can found 110v electric tankless hot water heater kitchen bathroom home for you.Please don’t forget to share your experience by comment in this post. Thank you!