minmommy 
Nowadays, there are so many products of marathon hot water heater in the market and you are wondering to choose a best one. You have searched for marathon hot water heater in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings marathon hot water heater which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
24,429 Reviews Scanned
Rheem SP610160 Element – 4500W CO U F
Product Description
The Rheem SP610160 is an element – 240V/4500W copper non-resistored LWD – 1.5-inch screw-in. Watt Density Classification: LWD. Input Voltage (V): 240. Wattage at 240V (W): 4500. Watt Density at 240V (W/sq. in. ): 98. Cold Resistance (ohms): 12.8. Outer Sheath Material: Copper. Resistored: No. Configuration: Foldback. Element Diameter (in.): .316. Element Length – Flange to Tip (in.): 13.38. Mounting Type: Threaded. Actual Thread Size – Outside Diameter (in.): 1-1/2. Nominal Thread Size – (in.): 1-1/2. Threads per Inch: 12. Thread Type Series Designation: UNF. Hex Head Size – Across Flats (in.): 1-7/8.
From the Manufacturer
The Rheem SP610160 is an element – 240V/4500W copper non-resistored LWD – 1.5-inch screw-in. Watt Density Classification: LWD. Input Voltage (V): 240. Wattage at 240V (W): 4500. Watt Density at 240V (W/sq. in. ): 98. Cold Resistance (ohms): 12.8. Outer Sheath Material: Copper. Resistored: No. Configuration: Foldback. Element Diameter (in.): .316. Element Length – Flange to Tip (in.): 13.38. Mounting Type: Threaded. Actual Thread Size – Outside Diameter (in.): 1-1/2. Nominal Thread Size – (in.): 1-1/2. Threads per Inch: 12. Thread Type Series Designation: UNF. Hex Head Size – Across Flats (in.): 1-7/8.
Rheem SP20060 Electric Water Heater Tune-Up Kit
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
Water Heater Element Wrench fits 1-1/2 in. and 1-7/8 in. Hex
Element Wrench – Dual (Fits 1-1/2 in. & 1-7/8 in. Hex)
Rheem SP11695 Electric Thermostat
From the Manufacturer
Rheem Thermostat – Electric
40 gal. Residential Electric Water Heater, 4500W
Complete 4 Panel Hybrid Solar Water Heater Kit
Our 4 Panel Hybrid Solar Water Heating Kit allows you to install your 4 panel solar water heater system in record time. Based on our new and improved SW-38 Solar Water Heater panels, you simply thread the panels together.
No more external connection pipes for multi panel installations! Each panel weighs slightly over 12 lbs. and is 24" by 24" but can still provide you with ample hot water. With this kit you DO NOT have to solder at all!
Please Note: This System will not work with Marathon non metallic water heaters and is NOT freeze protected. If you experience freezes you either have to drain the system
or consider our GS and GH type Solar Water Heating Systems.
Each kit comes with:
4 SW-38 Panels
All fittings, Adapters, and Connectors, Wire
1 TopsFlo TD5 Stainless Steel Pump
1 Bottom Feed Connector to connect directly to your existing water heater
1 10W PV panel to power the pump – NO grid connection required
Installation Intructions
All You have to supply is:
Your choice of 1/2" Pipe from the panels to the water heater(Copper, CPVC, or PEX)
Fasteners to attach the panels to the roof, and the parts to feed the pipes through the roof if needed.
Insulation for the pipes.
Your existing Water Heater
Tools needed for installation
Rheem SP10869MM Screw-In 240-volt by 4500-watt Element, Premium Resistored Stainless Steel
- Element – 240V/4500W stainless steel resistored lwd – 1 in screw-in
- Watt density classification: lwd, input Voltage (V): 208, Input voltage (V): 240, wattage at 208V (W): 3380
- Element diameter (in.): .316, Element length – Flange to tip (in.): 13.44, mounting Type: threaded, ACTUAL thread size – Outside diameter.): 1-9/32
- Thread type series designation: NPSM, configuration: fold back, nominal thread size – (in.): 1, threads per inch: 11-1/2
Product Description
Rheem SP10869MM water heater 1 inch 4500W element resistored screw-in LWD 240V stainless steel
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
Eastman 45058 Heavy-Duty Steel Water Heater Element Wrench
- MATERIAL: This water heater element wrench is made of high-quality, heavy-duty steel which provides strength and endurance
- DURABLE: The sturdy steel of this element wrench is chrome plated which provides extra durability making it last longer
- COMPATIBILITY: This water heater element wrench is universal which fits most standard screw-in elements
- CONTENT: This package includes 3/4 inch to 1/2 inch drive adapter
- EASE: This wrench makes replacement and installation of screw-in water heater elements quickly without hassle
Product Description
The Eastman 45058 Water Heater Element Wrench is made of high-impact heavy-duty steel which gives strength. The steel has a chrome finish which gives a modern look to the heater element socket also providing durability making it extremely long-lasting. The kit also includes 3/4 inch to 1/2 inch drive adapter.
USE :This water heater element socket is a must for every household as it lets you replace and install screw-in water heater elements quickly and easily without any hassle. It can be fitted on almost all standard screw-in elements. A modern design with efficient quality.
From the Manufacturer
Eastman’s Heavy-Duty Water Heater Element Wrench helps remove and replace residential screw-in water heater elements quickly and easily. Made of chrome plated steel for durability and strength. Includes a 3/4″ to 1/2″ drive adapter.
Rheem UV11699 Therm-O-Disc Upper Thermostat, Electric Water Heaters
Product Description
Thermostat – electric upper tod.
From the Manufacturer
Rheem Thermostat – Electric
Conclusion
By our suggestions above, we hope that you can found marathon hot water heater for you.Please don’t forget to share your experience by comment in this post. Thank you!
