minmommy 
Nowadays, there are so many products of pentek water filter housing in the market and you are wondering to choose a best one. You have searched for pentek water filter housing in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pentek water filter housing which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
36,149 Reviews Scanned
Pentek 150237 #10 Big Blue Filter Housing, 1" Female NPT Inlet/Outlet
- Large filter housing for high-flow and heavy sediment applications
- Reinforced polypropylene sump for strength and chemical resistance
- Use with a 10” x 4-1/2” filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 15 gpm
This Pentek 150237 1” #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 100 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 4-1/2 inches (254 x 114 mm) |
| Initial pressure drop at 15 gpm | 1 psi |
| Maximum temperature | 100 degrees F (37.8 degrees C) |
| Maximum pressure | 100 psi |
| Maximum dimensions (H x W) | 13-1/8 x 7-1/4 inches (333 x 184 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 1" Threaded 20" Genuine Big Blue Filter Housing Kit | Complete with Bracket, Screws and Wrench (150233 150061 144368)
- HIGH FLOW – HEAVY SEDIMENT : Large filter housing for high-flow and heavy sediment applications
- COMPLETE KIT : Housing comes with Stainless Steel Bracket, Screws and Wrench – Guaranteed to fit!
- QUALITY MATERIALS : Reinforced & High-Flow Polypropylene, Stainless Steel bracket & Screws
- PRESSURE RELIEF : Pressure relief button to remove pressure for easier cartridge replacement
- WARRANTY : One year limited warranty – see Pentek Inc. for details
This complete kit comes to you from Better H2O Products Inc which includs :
✪ Genuine Pentek 1″ #20 Big Blue filter housing (Pentek # 150233) with pressure relief valve,
✪ Genuine Pentek stainless steel bracket with stainless steel screws (Pentek # 150061) [which will not rust like white painted ones]
✪ Genuine Wrench (Pentek # 144368)
✪ All guaranteed to fit!
Don’t assume the parts will fit – order the complete kit!
All parts of this kit come neatly packaged in a single box
► Initial pressure drop of 2 psi at a flow rate of 15 gpm
►Suitable for high-flow and heavy sediment applications
►Whole home filtration, food and service, irrigation and more applications
►Opaque blue sump is made from reinforced polypropylene for strength and chemical resistance
►Black cap is made from high-flow polypropylene (HFPP) for stiffness
►1” female National Pipe Thread Taper (NPT) threaded input and output connections
►Nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal
►Pressure relief button on inlet to release pressure for easier filter changes
►Can be used with a 20” x 4-1/2” filter cartridge (sold separately)
►Maximum operating pressure of 90 psi
►Maximum operating temperature of 100 degrees F (37.8 degrees C)
►NSF 42 Certified for quality assurance
Pentek 150233, Big Blue, 1" In/Out, #20 Blue/Black, HFPP, w/ PR
- Large filter housing for high-flow and heavy sediment applications
- Reinforced polypropylene sump for strength and chemical resistance
- Use with a 20” x 4-1/2” filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 15 gpm
This Pentek 150233 20-BB 1” #20 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 20” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 90 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 20 x 4-1/2 inches (508 x 114 mm) |
| Initial pressure drop at 15 gpm | 1 psi |
| Maximum temperature | 100 degrees F (37.8 degrees C) |
| Maximum pressure | 90 psi |
| Maximum dimensions (H x W) | 23-3/8 x 7-1/4 inches (594 x 184 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 150071 3/4" #10 Standard Clear Filter Housing with Pressure Relief
- Standard filter housing for residential, commercial, and industrial applications
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 10 gpm
This Pentek 150071 3/4″ #10 Standard clear filter housing with pressure relief is suitable for residential, commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/4″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 10 gpm | 1 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 12-5/8 x 5-1/4 inches (321 x 133 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 160168 BBFS-222 1" #20 Big Blue Three-Housing Filter System
Pentek 158643 3/8" #10 3G Slim Line Clear Filter Housing with Bracket and Pressure Relief
- Slim filter housing for low-flow applications with space restrictions
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 2 psi at a flow rate of 5 gpm
This Pentek 158643 3/8″ #10 3G Slim Line clear filter housing with integrated mounting bracket and pressure relief is suitable for low flow rate applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/8″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 5 gpm | 2 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 13-3/8 x 5-3/8 inches (340 x 137 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Pentek 158110 3/8" #5 Slim Line Clear Filter Housing
Pentek 160166/BBFS-22 1" Two Big Blue Housing System
Pentek 160166/BBFS-22 1″ Two Big Blue Housing System
Similar items with 4 stars and above
Pentek BFS-201 3/8" #10 Slim Line Two-Housing Filter System
Conclusion
By our suggestions above, we hope that you can found pentek water filter housing for you.Please don’t forget to share your experience by comment in this post. Thank you!
