minmommy 
Nowadays, there are so many products of ice maker boxes in the market and you are wondering to choose a best one. You have searched for ice maker boxes in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ice maker boxes which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
30,359 Reviews Scanned
Eastman 60233 PEX Pre-assembled Ice Maker Outlet Box, 1/2 Inch Crimp PEX Connection with Installed 1/4-Turn Ball Valve, White
- CONNECTION: 1/2 inch Crimp PEX (F1807) Connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough opening of 5-3/4-inch W x 4-7/8-inch H x 3-1/2-inch D
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
This Eastman 60233 Pex Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
Eastman 60234 Pre-assembled Ice Maker Outlet Box, 1/2-Inch CPVC with Installed 1/4-Turn Ball Valve, White
- CONNECTION: 1/2 inch CPVC connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough Opening: 5-3/4-inch L x 3-1/2-inch x 4-7/8-inch H
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
This Eastman 60234 Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch CPVC inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
Sharkbite 25033A Ice Maker Outlet Box with Water Hammer Arrestors, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe
- INSTALLS IN SECONDS: Ice Maker Box requires no special tools, no soldering, no crimping, unions or glue. Just push to create a watertight seal to the SharkBite fitting
- COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination
- WATER HAMMER ARRESTOR: Includes a hammer valve to help assist with water shockwave prevention
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
SharkBite Ice Maker Outlet Box with Water Hammer Arrestors
The SharkBite Ice Maker Outlet Box with SharkBite quarter turn push-to-connect fittings allow for simple installation of a water main supply line with a quick and easy shutoff valve for refrigerator, ice maker, and water dispensers. This product is lead-free compliant and is offered with water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing.
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite lead free quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.
Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
Oatey 39130 1/2" FIP ICE Maker Box
Product Description
12K ice maker box with nails preloaded. Right or left hand installation. Provides quick, safe water supply and shutoff for refrigerator ice maker and water dispenser. Valves comply with requirements of NSF 61, Section 9. No support needed. Box dimensions: 3.20″ W. x 4.15″ H. x 2.35″ D. Faceplate dimensions: 5.00″ W. x 5.89″ H. x .50″ D. U.S. patent No. D428.117. Canadian patent No. 90133. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
From the Manufacturer
Oatey products can be found in residential and commercial applications and have achieved excellent brand name recognition with consumers. All products are backed with the highest quality technical and customer support programs in the industry
Lekue Ice Box, White
- Large storage capacity of up to 132 ice cubes, 4 trays
- Container is made of abs plastic and composed of a hollow base to preserve coldness and avoid the formation of condensation
- Lid is made of resistant silicone and easy to handle, with original shaped pieces of ice
- It is possible to remove the ice cubes individually or all at once, according to the pressure applied to the tray
- A perfect ice cube tray for table-side presentation
IKICH Portable Ice Maker Machine for Countertop, Ice Cubes Ready in 6 Mins, Make 26 lbs Ice in 24 Hrs with LED Display Perfect for Parties Mixed Drinks, Electric Ice Maker 2L with Ice Scoop and Basket
- 【MAKE YOU GET ICE QUICKLY IN 6 MINUTES】IKICH quick ice maker machine works fast, just 6 minutes to get 9pcs of chewable, delicious, bullet-shaped ice-cubes per cycle and up to 26 lbs/12 kg of ice in 24 hrs with its 2-liter/68 oz water reservoir. As the machine needs time to preheat like freezer, the effect of first or second time will be slightly less effective, it will be normal after a few more uses.【Note: For normal use, please must let machine stand upright for 4 hours before first use.】
- 【QUIET & ENERGY EFFICIENT ICE MACHINE】IKICH countertop ice maker achieves low noise level, fast cooling effect and low consumption with powerful compressor, high quality copper aluminum fin condenser and 21g R600a refrigerant. It runs at less than 45dB which means your entertainment will not be disturbed. Measures just 8.7 x 12.3 x 12.6 inches. Small enough to fit on most countertop and easy to store when not in use. Say “Goodbye” to noisy and bulky ice machines.
- 【INTELLIGENT ICE MAKER WITH SMART INDICTOR 】With simple control panel, just add water, plug it in, press the power button, select the ice size and forget it. The indicator lights up when the ice is full or you need more water. No plumbing required, easy to fill and clean. With a outlet and drain plug at the bottom, easy to empty the unused water. Don’t need any complex installation.
- 【LARGE OR SMALL ICE SELECTABLE WITH BASKET & ICE SCOOP】2 ice sizes optional. Popular bullet-shaped ice, not easy to melt and stick together, great for cooling drinks or small water bottle openings, food and for first aid. Large translucent window for easy observation. BONUS-removable ice basket and ice scoop, convenient for you to transfer ice cubes to your drink or ice bucket. This nugget ice maker can go anywhere which doesn’t need a water hookup.
- 【2-YEAR WARRANTY FOR TOPELEK ICE MAKER】IKICH offers 2-year warranty and 30-day return policy for this safe and portable under counter ice maker machine. Made of food-grade material, just for your health and safety, no odor. Durable ABS shell, smooth and easy to clean. It takes up less space at home or in the office, barbeques, outdoor parties, or basement bars. If you have any problem, please feel free to contact with us. Our technical advice and customer service are provided throughout life.
FirstBuild OPLSDTNK01 Opal Side Tank
- Opal Side Tank connects to Opal on either side with powerful magnets built into its base. The design perfectly complements Opal for a design you?ll be proud to feature on your countertop
- By providing about a gallon more water to your Opal Side Tank lets Opal produce about 3 more bins of ice before having to refill
- Opal Side Tank lets Opal produce about 3x more ice before having to refill?giving you more of the good ice
Eastman 60238 Crimp PEX Round Mini Pre-assembled Ice Maker Outlet Box, 1/2-Inch Connection with 1/4-Turn Ball Valve, White
- CONNECTION: 1/2 inch Crimp PEX (F1807) Connection and 1/4-inch OD compression outlet
- Trim Ring accommodates up to 1″ sheet rock
- DURABLE: Preloaded nails provide strong rigid mount
- INSTALLATION: This installation kit does not need a support bracket
- nails are reversible, and the box can be mounted to left or right stud bay.
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-Turn brass valve, pre-loaded nails, and a faceplate cover
- USAGE: It is designed for recessed residential applications
This Eastman 60238 Crimp PEX Round Mini Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection
This outlet box comes complete with a 1/4-Turn Ball valve installed, pre-loaded reversible nails which provide a strong rigid mount, and a faceplate cover. It does not need a support bracket, and the outlet box can be installed to the left or right stud bay. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box, 1/2-Inch Sweat with Installed 1/4-Turn Ball Valve, White
- CONNECTION: 1/2 inch Sweat inlet connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough Opening: 5-3/4-inch L x 3-1/2-inch x 4-7/8-inch H
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
This Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Sweat inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
Eastman 60242 Pre-assembled Ice Maker Outlet Box, 1/2-Inch Crimp PEX Connection with Installed 1/4-Turn Ball Valve and Hammer Arrester, White
- CONNECTION: 1/2 inch Crimp PEX (F1807) Connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough Opening: 5-3/4-inch L x 3-1/2-inch x 4-7/8-inch H
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, installed hammer arrester, support bracket and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
This Eastman 60242 Crimp PEX Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, installed hammer arrester, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
Conclusion
By our suggestions above, we hope that you can found ice maker boxes for you.Please don’t forget to share your experience by comment in this post. Thank you!
