minmommy 
Nowadays, there are so many products of ice box maker in the market and you are wondering to choose a best one. You have searched for ice box maker in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ice box maker which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
49,356 Reviews Scanned
Eastman 60233 PEX Pre-assembled Ice Maker Outlet Box, 1/2 Inch Crimp PEX Connection with Installed 1/4-Turn Ball Valve, White
- CONNECTION: 1/2 inch Crimp PEX (F1807) Connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough opening of 5-3/4-inch W x 4-7/8-inch H x 3-1/2-inch D
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
This Eastman 60233 Pex Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
Eastman 60234 Pre-assembled Ice Maker Outlet Box, 1/2-Inch CPVC with Installed 1/4-Turn Ball Valve, White
- CONNECTION: 1/2 inch CPVC connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough Opening: 5-3/4-inch L x 3-1/2-inch x 4-7/8-inch H
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
This Eastman 60234 Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch CPVC inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
Lekue Ice Box, White
- Large storage capacity of up to 132 ice cubes, 4 trays
- Container is made of abs plastic and composed of a hollow base to preserve coldness and avoid the formation of condensation
- Lid is made of resistant silicone and easy to handle, with original shaped pieces of ice
- It is possible to remove the ice cubes individually or all at once, according to the pressure applied to the tray
- A perfect ice cube tray for table-side presentation
Hawaiian Shaved Ice S900A Electric Shaved Ice Machine | Features 2 Round Block Ice Molds | Shave Ice in minutes | Make Snoballs and Shave Ice from Home
- DELICIOUSLY FUN FOR EVERYONE: Great for shaved ice, snow cones, slushies, margaritas and other fun drinks.
- PROFESSIONAL QUALITY SNOW: Shaves fine, fluffy snow when used as suggested. A classic treat made in your own home! Not suited for commercial or continuous use.
- CLEAN & SLEEK: Attractive countertop design and disassembles in seconds for easy storage.
- INCLUDES: Two ice molds used to freeze round blocks of ice for shaving soft fluffy snow. 1-year Warranty. Non-slip Mat.
- CUSTOMERS SAY: Great for making shaved ice on a hot day for the family. | This is a solid product which gives consistent results.
This Shaved Ice Machine is great for shaved ice, snow cones, slushies, margaritas, fun drinks and more. The Hawaiian Shaved Ice brand machine is fun and easy to operate. Included with the machine are two round ice molds.
To use, simply fill the round ice molds with water and freeze overnight to produce small, round blocks of ice. Next, allow the ice to temper (or thaw) for 5-7 minutes before shaving. Remove ice from the mold and place ice into the ice crusher cup. Next, place the motor unit in position and gently press down on the motor assembly to shave a mound of soft fluffy snow. When the ice production completes, there will be a thin layer of the ice block in the ice crusher cup. This is to prevent the ice-gripper plate from making contact with the blade. To remove the leftover ice, simply turn the unit upside-down and allow the remaining ice to fall or you may wait to allow the ice to melt. Never insert fingers into the ice crusher cup or near the blade.
The design of the Hawaiian Shaved Ice Machine makes it an attractive countertop appliance. If storage is preferred, the machine is designed to be quickly disassembled for easy storage.
The Hawaiian shaved ice machine plugs into any standard household electrical plug (120V) and features an adjustable, stainless steel blade. Additional ice molds and replacement blades are available and sold separately. Also included is a 1-year manufacturers’ warranty. Always read the instruction manual before operating.
- Electrical: 120V, 55W, 60Hz
- Assembled Dimensions: 6 1/2″ W x 8″ D x 14″ H
- ETL Listed
- Adjustable Blade
- Parts: Motor Unit, Ice Crusher Cup, Support Base, 2 Ice Molds, Non-Slip Mat
- BPA Free
- Easy to Clean
GENERAL PRECAUTIONS – Before using this appliance for the first time, or after a long period of disuse, wash the ice molds and the ice crusher cup in warm water with dish soap, rinse and dry thoroughly. Before plugging in the appliance, check that the button is in not pressed “on”. Ice blocks that have not been made using the molds supplied should never be placed in the container cup. Most ice cubes from residential ice shavers may be used in the ice shaver. To avoid overheating, do not run the appliance for longer than 2 consecutive minutes. If you need to crush a large quantity of ice, do so leaving pauses in between. Never place fingers into the container cup as the blade is very sharp and could cause injury. Do not damage the blade by introducing metal implements. Do not attempt to sharpen the blades; if necessary, replacement blades may be purchased.
Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe
- INSTALLS IN SECONDS: Ice Maker Box requires no special tools, no soldering, no crimping, unions or glue. Just push to create a watertight seal to the SharkBite fitting
- COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination
- LEAD FREE COMPLIANT: DZR lead free brass SharkBite valves
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.
Oatey 39130 1/2" FIP ICE Maker Box
Product Description
12K ice maker box with nails preloaded. Right or left hand installation. Provides quick, safe water supply and shutoff for refrigerator ice maker and water dispenser. Valves comply with requirements of NSF 61, Section 9. No support needed. Box dimensions: 3.20″ W. x 4.15″ H. x 2.35″ D. Faceplate dimensions: 5.00″ W. x 5.89″ H. x .50″ D. U.S. patent No. D428.117. Canadian patent No. 90133. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
From the Manufacturer
Oatey products can be found in residential and commercial applications and have achieved excellent brand name recognition with consumers. All products are backed with the highest quality technical and customer support programs in the industry
SPHERE ICE MOLDS – Easily Create Large 2.5 Inch Ice Balls With Our Premium Silicone Ice Ball Mold For Whisky, Cocktails, Wine & More. Set of 2 Elegant Black And Gold Designed Ice Sphere Maker.
- ✔️ EASY TO USE – Just fill the water, let it freeze and easily remove the ball from the mold with our non-stick silicone sphere ice maker.
- ✔️ EASY TO STORE – No longer do you need to fumble around your freezer to make room for those bulky ice sphere trays. Our unique & independent round ice molds can be stored in separate locations which require little space unlike the tray ice sphere makers.
- ✔️ LARGE ICE BALLS – Our ice ball molds creates perfectly round 2.5 Inch spheres that will keep your drink freezing cold much longer than traditional ice cubes. Each sphere can freeze a traditional glass for up to 3 HOURS without watering your drink down.
- ✔️ CRAFT ELEGANT DRINKS – The round sphere mold helps to create an elegant circle ice design that goes great with any drink. Try it with bourbon, whisky, scotch, vodka, gin, tequila, non-alcoholic drinks & more!
- ✔️ QUALITY INSPECTED, FDA APPROVED & BPA FREE – Are you worried about ordering products from China? Our products have been inspected by a reputable third party for quality assurance. No compromise on material and quality. We use the highest quality material approved by the FDA as well as it being BPA free.
Crystal-Clear Ice Ball Maker, 2-Cavity Mold, Jumbo Ice Balls, Better Kitchen Products
- Fully-insulated slow-freezing method for ice production creates 2.4″ crystal-clear ice spheres
- Attractive gift box packaging will impress the avid bar and drink enthusiast
- Slow-melting ice is a must when you break out your aged scotch, bourbon or whiskey
- Silicone mold inserts and an insulated immersion reservoir, specially-designed to minimize gas particles in the ice, resulting in crystal-clear balls of ice perfection every time.
- No need for distilled water or boiling water
- add warm tap water and our Crystal-Clear Ice Ball Maker will do the rest! The easy to follow directions give you two high-quality round, crystal-clear 2.4″ ice balls in 24-30 hours. Simply fill the reservoir with warm water, insert the silicone molds, top off with more warm water, freeze, and enjoy!
When the occasion calls for a special bottle of your best spirits, slow-melting ice is a must. Our Crystal-Clear Ice Ball Maker creates two perfectly round, crystal-clear 2.4″ ice balls that will keep your drink at the right sipping temperature without diluting it. Finally, ice balls worthy of the drinks they’re poured over!
Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box, 1/2-Inch Sweat with Installed 1/4-Turn Ball Valve, White
- CONNECTION: 1/2 inch Sweat inlet connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough Opening: 5-3/4-inch L x 3-1/2-inch x 4-7/8-inch H
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
This Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Sweat inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
Conclusion
By our suggestions above, we hope that you can found ice box maker for you.Please don’t forget to share your experience by comment in this post. Thank you!
