![The 10 Best Temperature Controller Digital Outlet Heat Mat Thermostat With Heating And Cooling Mode](https://images-na.ssl-images-amazon.com/images/I/81ypQAeidSL._SL1500_.jpg)
The 10 Best Temperature Controller Digital Outlet Heat Mat Thermostat With Heating And Cooling Mode
Nowadays, there are so many products of temperature controller digital outlet heat mat thermostat with heating and cooling mode in the market and you are wondering to choose a best one. You have searched for temperature controller digital outlet heat mat thermostat with heating and cooling mode in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings temperature controller digital outlet heat mat thermostat with heating and cooling mode which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Inkbird Digital Outlet Heat Temperature Controller with Day Night Control for Brewing, Aquarium, Breeding, Reptiles, Hatching, Heat Mat
- ????????[Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
- ????????[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- ????????[Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
- ????????[Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
- ????????[Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
WILLHI WH-1803A Digital Temperature Controller Upgraded Heating and Cooling Mode 110V 15A Programmable Outlet Thermostat with Waterproof Probe for Brewing Aquarium Breeding Heat Mat
- 【UL Certification power cable】– WILLHI Digital Temperature Controller has high quality power cable, the top quality copper wire can load large currents.
- 【Overcurrent Protection】 – Our temperature controller has very safe overcurrent breaker designing, it can shut off the heater or cooler automatically if the equipment got short circuit.
- 【Waterproof Sensor】 – Place the waterproof probe, plug the power cord in the Temp Controller . Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
- 【Widely Applied】 – The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat,pet breeding,incubation,HVAC equipment, accelerating germination,electric radiator, electric oven,fermentation, grow tent, home brewing, aquarium and BBQ, etc.
- 【6 Month Warranty】 – We provide this WILLHI Digital Temperature Controller with 6-Month Warranty and 24hours customer service, if you have any questions, we will resolve your issue within 24 hours.
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
WILLHI WH-1803B High Temperature Controller Upgraded Heating and Cooling Mode -22℉~572℉110V 15A Programmable Digital Outlet Thermostat Waterproof Probe NTC Sensor for Smoker BBQ Heat Mat Temp Control
- 【High Temperature Controller 】- Our high temperature controller Probe measurement range: -30 ~300 ℃ / -22~572 ℉.
- 【UL Certification power cable】– WILLHI Digital Temperature Controller has high quality power cable, the top quality copper wire can load large currents.
- 【Overcurrent Protection】 – Our temperature controller has very safe overcurrent breaker designing, it can shut off the heater or cooler automatically if the equipment got short circuit.
- 【High and low temperature alarm】 – Place the waterproof probe, plug the power cord in the Temp Controller . Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
- 【Widely Applied】 – The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat,pet breeding,incubation,HVAC equipment, accelerating germination,electric radiator, electric oven,fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and Digital Timer Controller for Aquarium, Seed Germination, Reptiles, Hatching ect, Without Cooling Controlling
- [Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
- [Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
- [Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
Inkbird day and night temperature controller is a pre-wired heating output temperature controller (No Cooling Control) with time function specifically for breeding and planting.
It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants.
It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
With large power output 1,200W, it’s suitable for most applications. And the temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
Specification:
Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 °C / 0.1°F
Temperature Accuracy:±1°C (-50~70°C) / ±1°F (-58~160°F)
Input Power : 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Ambient Temperature: -30~ 75 °C / -22~ 167 °F
Storage Temperature: -20~ 60 °C / -4~ 140 °F
Humidity: 20~85% (No Condensate)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Warranty: 1 Year
Package Included:
1 x Temperature and Time Controller
1 x Manual
bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
DIGITEN LCD Digital Thermostat Temperature Controller Simple Stage Pre-Wired Heating & Cooling w/Sensor 110V-240V, -40~248℉ for Beer Fermentation Refrigerator Fan Control 10A
- ★【High Accuracy】: The temperature sensor is made of silicone, it is waterproof, high quality. This device provides constant optimal temperatures, and keeps your environment in the ideal temperature range.
- ★【Large LCD screen】: Glare free and eye protected, standard U.S. outlet, plug and play design, support °C/°F display, easy to read and programme.
- ★【Easy to use and program】: Only 2-step settings for your application, it can be used for heating mode or refrigeration mode.
- ★【Convenient Design】: Handheld device appearance consistent with the principles of ergonomics. Max output load: 1100W@110V, 2200W@220V, max current: 10A.
- ★【Wide Applications】: Home wine/beer brewing, aquarium, green house, seedling heat mat, BBQ, boiler operating control, BBQ, grow tent, fermentation, incubation, etc.
This thermostat is simple-stage, electronic temperature controller. The large, lighted LCD screen display is easy to read. The case is designed with fireproof ABS material for human engineering. Temperature sensor is waterproof with high quality, high-accuracy.
Features:
Large LCD screen
Display the sensed temperature, setting temperature, and custom icons on the display indicate working mode, glare free and eye protected.
Support reading with Centigrade or Fahrenheit unit
Easy to use and program
Only 2-step settings for your application, and plug and play design.
With a temperature correction function
Allow user to adjust measuring accuracy base on diferet probe, etc.
Delay starting protection
Protect refrigerating compressor lifetime, avoid compressor to start frequently.
High and low temperature alarms are available
Over-temperature and sensor fault alarm
Specifications:
Power Supply: 100-240VAC 50/60HZ
Max output load: 1100W@110V, 2200W@220V
Max current: 10A
Temperature Control Range: -40~120℃, -40~248℉
Temperature Control Mode: Heating or Cooling
Temperature Resolution: 0.1℃, 0.1℉
Temperature Accuracy: ±1℃, 1℉
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: Waterproof NTC Sensor
Sensor length:Approx 2m(6 fts)
Input Power Cable Length:150cm (5ft)
Output Power Cable Length: 18cm (7inches)
Controller Dimension: 137*65*28mm
Please note:
The controller will save all settings when power failure. The DIGITEN products are guaranteed to the original owner for one year against defects in workmanship and materials. If there are any questions, please contact us, we will help you.
Packaging include:
1 x DTC101 Temperature Controller
1 x NTC sensor
1 x Manual
DIGITEN Digital Thermostat Outlet Controller Switch Simple-Stage Plug LCD Temperature Control Heating or Cooling
DIGITEN AC100-240V Digital Pre-wired Temperature Controller with Sensor Outlet Thermostat Heating Cooling Greenhouse Freezer
- ☺Convenience: Plug and play, easy to use.
- ☺LED Display: Be able to show measured temperature and set temperature at the same time.
- ☺Dual Modes: Freely switch between heating and cooling modes.
- ☺Temperature Unit: Supports Centigrade or Fahrenheit.
- ☺Application: Brewing, breeding, greenhouse, household appliances, etc.
The HM-W2102 features pre-wired cord with a plug to install in your electrical socket, a output socket to plug your appliance, and The LED display show process temperature and setting temperature.This device is fairly simple to set up and adjust, switch to heating or cooling mode freely.It is very accurate in keeping the temperature at the desired level. Plug and play design, easy to use. And this controller built-in the function of Intermittent ON/OFF Mode, delay start mode, and delay stop mode. it is widely used for seedling heat mat, home brewing, beer brewing, aquarium heater, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, heat mat, etc.
Feature & Specification
Power Supply: 100-240VAC 50/60HZ
Temperature Control Output: Max. 10A, 100V ~240V AC, up to 2200W
Working mode: Heating or Cooling mode
Temperature detecting: -55°C to 120°C, Accuracy ±0.1°C
Temperature Control Range: -19°C to 99°C
Temperature calibration range: -9.9°C to 99°C, resolution ±0.1°C
Input sensor: NTC (10K) 3950 Waterproof, sensor length:Approx 2m(6 fts)
Input Power Cable Length: 1m (3ft)
Power consumption: less than 3W
Heating mode: When SV1 <>
Cooling mode: When SV1 > SV2
Only display Celsius degree
Control Outlet suitable for US 2-prong, US 3-prong, UK plug, etc.
Dimension: 138*98*44mm
Conclusion
By our suggestions above, we hope that you can found temperature controller digital outlet heat mat thermostat with heating and cooling mode for you.Please don’t forget to share your experience by comment in this post. Thank you!