The 7 Best Incubator Heating Element 45110

100% brand new and high quality
Features:
Simply remove the damaged heating element and replace with new one.
Can also be used for DIY incubators
Application: Heating element replacement part for incubator, brooder,etc
Heating plate only, other accessories demo in the picture is not included!

Specification:
Voltage: 110V or 220V
Main Material: Metal
Size: app.8cmx1.8cm/3.15×0.71”
Main Color: Silver,As the pictures shown
Quantity: 1 Pc
Note: 1.Transition: 1cm=10mm=0.39inch
2.Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x Heating Plate (No retail package)

Specification:
100% Brand new and high quality
Description:
Rated Power:100W
Rated Voltage:110V AC/DC(Either AC or DC is available)
Size:95*31mm
PTC Chips Temperature:230 degrees Celsius
heat material: PTC Thermistor
heat methods:heat radiation by air flow
main usded in:clothes dryer/Air conditioning units/equipment/General electric appliance/Air curtain machine etc.
notice: The power consumption of the heater is not a fixable data. The better heater radiation, the bigger the power is.this model can be use without extra dissipation.
Be careful when use it.
This is a kind of Surface-Electrified PTC heater.
When the heater is working, the aluminum parts are conductive.
Details
with plastic bracket
Package include :
2 x PTC heating element 110V

The IncuKit XLis an all-in-one kit designed to be the heart and brains of a homemade cabinet incubator. It allows you to convert a cabinet-sized enclosure into an incubator! First, select which style of thermostat is best for you: Basic Thermostat module: This is a standard on/off thermostat. This means that when the temperature hits a certain point, it turns the heater off and then back on full power once the temperature drops below a certain point. It will control the heater and fan. This comes pre-set to 99.5 degrees F. Advanced Thermostat module: This is a proportional thermostat. As the temperature gets closer to the target temperature, it begins tapering off the power to the heater. This provides more precise control and provides lower temperature variation in the incubator. This unit also has a count-down hatch timer and provides the option to control an egg turner motor. Second, select how many heater and fan modules your container will require: The number of heater and fan modules will be determined by the size of your container, how well it is insulated and the temperature outside the incubator. The IncuKit XL can be configured with one or two heater and fan modules, depending on these factors. Each heater and fan module will provide 125 watts of power. For medium size containers this may be all you need. For larger containers, you can add a second module to add an additional 125 watts of power. To determine which option is best for you, a simple light bulb test will help. Get light bulbs that will generate enough heat to easily warm your inubator to at least 100 degrees F. See how many watts are required and that will help you know which option to select. The buyer is responsible for determining if this will generate enough heat for your enclosure. Caution: this is an AC powered device that you will be mounting in your incubator yourself. You must use a great deal of common sense when dealing with electrical devices.

110V 80W Incubator Heating Element Replacement Part For 48/56 Egg Incubator – Arduino Compatible SCM & DIY Kits Smart Robot & Solar Panel – , , , , 1x Incubator Heating Element, , , , Note: Only Heate
Specifications: Material: Metal
Color: Silver
Dimensions: 80x20x5.5mm
Wire Length: 30cm
Voltage: 100V
Power: 80W
Fit For: For 48/56 Egg Incubator
Package Included:
1x Incubator Heating Element
Note: Heater included, must be attached to existing wires.

This listing is for brand new 225 watt replacement heater coil for cabinet style egg incubators. Wire heats and cools quickly, minimizing overheating, making this an ideal choice for larger egg incubators 225 watts of power Voltage requirement: 110/120VAC (see our other products for the 220/240V version) This is a substitute for GQF Part # 3014 – 225 watt coil heater in cabinet style incubators

100% brand new and high quality
Features:
Simply remove the damaged heating element and replace with new one.
Can also be used for DIY incubators
Application: Heating element replacement part for incubator, brooder,etc
Heating plate only, other accessories demo in the picture is not included!

Specification:
Voltage: 110V or 220V
Power: 80W
Main Material: Metal
Size: app.8cmx1.8cm/3.15×0.71”
Main Color: Silver,As the pictures shown
Quantity: 1 Pc
Note: 1.Transition: 1cm=10mm=0.39inch
2.Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x Heating Plate (No retail package)

Description

100% brand new and high quality. 
Simply remove the damaged he ating element and replace with new one. 
Can also be used for DIY incubators 
Application: Heating element replacement part for incubator, brooder,etc 
Heating plate only, other accessories demo in the picture i s not included! 

Specification: 
Voltage: 110V 
Main Material: Metal 
Size: app.8cmx1.8cm/3.15×0.71” 
Main Color: Silver,As the pictures shown 

Note:  
1.Transition: 1cm=10mm=0.39inch 
2.Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid. 
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! 

Package includes: 
1 x Heating Plate (No retail package)
 

Conclusion

By our suggestions above, we hope that you can found incubator heating element 45110 for you.Please don’t forget to share your experience by comment in this post. Thank you!