Best 40Gal Hot Water Heater

The heat electric tank less water heater S-16 model has the capacity of heating 3.5 gpm which is the equivalent to 2 showers (at 1.5 gpm each), and 1 sinks (at 0.50 gpm each) simultaneously, or any combination which equals to 3.5 gpm. The S-16 can handle these applications in the warmer climates of the us which are Florida, Georgia, Louisiana, Texas, Arizona, California, Alabama, and Mississippi. Anything north of these States the S-16 model can be used for point of use, or 1- application at a time. A good rule of thumb is if you live in the southern States mentioned here the S-16 can power a 3 to 4 bedroom 2-1/2 bathroom home, including dishwasher and clothes washer, please keep in mind that tank less water heaters are designed to heat incoming water at a maximum output temperature based on simultaneous use and inlet water temperatures. So if your demand for hot water decreases your output water temperatures will increase, as well as if you live in the colder States this S-16 will heat less volume of water, this will cause the S-16 to be used in point of use applications in the colder climates.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Using the “Patented” Reflective Foil Hot Water Tanks Heater Jacket stops 97% of Radiant Heat loss! Heating the Water in your Hot Water Tank at home is the second largest energy consumption next to Heating and Cooling Air. Your Hot Water Tank continues to work even when you are at work, sleep or on holidays. As the water cools down due to the loss of heat, your Hot Water tank starts up again to maintain a desired temperature. The cost savings using a Hot Water Heater “Reflective-Foil Jacket” are immediate and also helps prolong the life of your Hot Water Tank. The Patented “Reflective Foil” is 3/16” thick which has a single layer of polyethylene bubbles sandwiched between two highly reflective surfaces. It is specifically designed to reduce the amount of radiant heat transfer. NOTE: This product is exclusively made and Tested for JR Global Sales ‘Only’ and anyone else selling this product is NOT authorized to do so and is sending another product that may NOT have been ‘Tested’ and may not be ‘Fire Rated’. If the product is NOT sold by JR Global Sales than it is NOT the same product that is being offered here. If the product is ‘Sold Out’ and not in stock by JR Global Sales than replenishment stock is on its way. Thank you Also available in our 50-60 Gallon Kit, https://www.amazon.com/dp/B00Z7NNXNQ

Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

This compact , yet powerful unit – with gas inputs up to 140,000 BTU per hour – can meet all the hot-water needs of a small to medium American home or apartment. Designed to virtually do anything a 40-gallon tank-type water heater can do and much more The Wall mounted Excel Pro is design to work with hydronic baseboard or radiant floor heating applications, as well as provide domestic hot water to plumbing fixtures and appliances. LCD Display Control: Just set the desired water temperature The Excel Pro has an energy factor of 0.84-0.85. Excel Pro: Modulating Technology Tankless water heaters can be further divided into two categories according to their heating capability: “full on/full off” versus “modulating”. Full on/full off units do not have a variable power output level; the unit is either fully on or completely off. This can cause an annoying and possibly hazardous variation of hot water temperature, as the flow of water through the heater varies. Modulated tankless water heaters change their heat output in response to the flow rate of water running through the unit. The Excel Pro comes with a display panel where you can set the output temperature and regardless of water flow the unit modulates the fire power. Pure Copper Heat Exchanger * As used by other top of the line tankless gas water heater manufacturers like Rinnai, Takagi, Rheem and Noritz. Features & Benefits Super compact 14.5″ x 23″ x 5.5″ size 84%+ thermal efficiency 140,000 BTU maximum input 6.6 gallons/ minute capacity at 35F degree rise Minimum activation flow rate of 0.5 gpm Electronic ignition. Has a Power vented fan that Vents directly vertically or horizontally with 3” stainless steel flue 3′ long flue and elbow included. Can be used in recirculation and space heating application . Delivers 6.6 gpm of hot water with a 35°F Instant Temperature Rise (Equivalent to 5.5gpm with a 45F temp Rise). European Model Digital Display is in Celsius.

Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

Product Description

Our high-efficiency plus RL models, offer Rinnai’s most advanced technology in non-condensing tankless water heaters. You’ll enjoy the endless hot water and energy savings you expect, with the addition of Wi-Fi monitoring and recirculation technology for faster hot water delivery.

From the Manufacturer

The R94LSi lets you enjoy continuous hot water for up to five plumbing and appliance outlets simultaneously and always at a consistent, pre-set temperature. With a capacity of up to 9.4 gallons of hot water per minute (GPM), the R94LSi still delivers up to 40% energy savings and significant space savings. This compact, interior-mount unit vents directly to the outside with a concentric venting system.

Conclusion

By our suggestions above, we hope that you can found 40gal hot water heater for you.Please don’t forget to share your experience by comment in this post. Thank you!